铸铝合金腐蚀测定器JSN2901

产品型号：JSN2901

产品名称：铸铝合金腐蚀测定器JSN2901

产品说明：

JSN2901铸铝合金腐蚀测定器

一、符合SH/T0620标准

二、主要技术参数：

工作方式：温控器PID控温

控温精度：135±0.1℃

测温方式：高精度铂电阻测温

计时方式：自动计时

加热方式：金属铸铝加热

*控温方式：电子数显温控仪

功    率： 650W

工作电源： AC220V±10%  50HZ

三、性能及特点

1、本仪器采用进口高精密控温表PID温度控制，其温度稳定，使用寿命长；

2、仪器采用进口高精度铂电阻测温，采用高精密度的温度数显仪对试样温度控制，精确可达0.1℃；

3、本仪器采用金属浴代替水浴或油浴，克服了大气压给温度带来的影响。在试验完毕后，能自动关闭加热系统，节约能源；

4、本仪器在断电后再次恢复运行时，仪器将自动恢复计时，为操作者提供方便，节省时间。

JSN2901 cast aluminum alloy corrosion tester

I. It conforms to SH/T0620 standard

Ii. Main Technical parameters:

Operating mode: Temperature controller PID temperature control

Temperature control accuracy: 135±0.1℃

Temperature measurement: high precision platinum resistance temperature measurement

Timing: Automatic timing

Heating method: Metal casting aluminum heating

* Temperature control mode: electronic digital display temperature controller

Power: 650 w

Power supply: AC220V±10% 50HZ

Iii. Performance and Characteristics

1, the instrument adopts imported high precision temperature control table PID temperature control, its temperature stability, long service life;

2. The temperature is measured by imported high-precision platinum resistance and controlled by high-precision temperature digital display instrument, which is accurate up to 0.1℃;

3. The instrument adopts metal bath instead of water bath or oil bath, which overcomes the influence of atmospheric pressure on temperature. After the test, the heating system can be shut down automatically to save energy.

4. When the instrument resumes operation again after power failure, the instrument will automatically resume timing to provide convenience for the operator and save time.